| Customization: | Available |
|---|---|
| Type: | Lithium Metal Battery |
| Cathode Material: | LFP |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | ES-200 | ||
DC CAR INPUT CHARGE |
Input Voltage | V/DC | Standard:9-30V |
| Input current | A | Car Input Voltage 13.5-16.5V/5A,Car Input Voltage 24-29V/5A | |
| Efficiency | % | Input Voltage ≤24V Efficiency 86% ;Input Voltage >=24V Efficiency 86% | |
| Inverter output |
Output Voltage | V/AC | 220V AC:No load/229V,Fully loaded/216V 110V AC:No load/129V,Fully loaded/116V |
| Frequency | HZ | 220V/50HZ or 110V/60HZ | |
| Efficiency | % | 220V AC /92% ;110V AAC /92% | |
| Output power | W | Rated/200W,Peak/400W, Over 210W Protection, | |
| Waveform | AC pure sine wave | ||
| Ripple | ≤200MV | ||
| Overcurrent | When the output current exceeds the set value, the protection is delayed by 600 milliseconds | ||
| Short Circuit | Automatic recovery after short circuit | ||
| Overload | After overload, the power will be automatically reduced. | ||
| Over temperature | °c | When the motherboard heat sink temperature exceeds 50 degrees, the fan will automatically turn on for cooling, and when it exceeds 85 degrees, it will automatically protect | |
Solar input |
Input voltage | V | 9-30V |
| Input power | W | Max 140W | |
| Principle | MPPT | ||
| Output voltage | V | 25.6V | |
| Output current | A | When the solar input voltage is different, the corresponding charging current is also different, 6.5V/3A 9V/2A 13.5V/1.5A 16.5V/5A 24V/5A 29V/5A | |
| Efficiency | % | Charging efficiency is 86% when input voltage is lower than 24V; charging efficiency is 92% when input voltage is higher than 24V | |
PD Charge |
Input voltage | DC | 9-30V |
| Charge power | W | Use Type-C is DPC/DMC/CC1/CC2 The charger will automatically adjust the charging current to suit different load capacities. Maximum charging power: 140W | |
| Charge Time | H | 140W/PD Charge,About 1 Hour >=95% 100W/PD Charge,About 1.5 Hour >=95% 65W/PD Charge,About 2 Hour >=95% 18W/PD Charge,About 8 Hour >=95% |
|
| Conversion efficiency | % | About 92% | |
Over temperature |
Fan temperature | ºC | Fan starts when the temperature exceeds 45 degrees |
| Over temperature protection | ºC | The heat sink temperature exceeds 85 degrees and automatically protects against external output | |
 |
|
|
|
){kind=link}